服装外贸英语 求翻译啊
1，Hang tab at back neck
后领口应该粘上/悬挂标签。
2，Drop shoulder with edgestitching to be flannel
间边线上的肩下垂应该用法兰绒布料。
3，Size indicatr label at back neck
后领 尺寸说明 标签。
4，Inner body lining to be yarn dye flannel
内衫身里应该用色织法兰绒布。
5，Body & sleeves to be padded & quilted
上衣的主要部分(领、袖除外）和袖口应该装上填料并缝合。
6，Cut & sew panel at sleeve with twin needle stitching to be yarn dye flannel
袖的切口和缝面布块用双针（线）缝合，其布料是色织法兰绒。
7，Laid on PU strip with edgestitching at sleeve
袖口处的间边线应装置聚氨酯布条。
8，Topstitch detail at sleeve opening
袖口明线细则。
9，Inner collar stand with edgestitching to be flannel
间边线的内下级领应该用法兰绒布料。
10，PU collar with foot stitching
PU 领口用脚线针。(注：PU 可能表示一种布料成分，可能是聚氨酯，具体什么脂我不太清楚）
11，Collar stand to have footstithing & tab closure with 1x branded metal snap (snap col - antique silver)
下级领有脚线针和袢扣封闭，用的扣是一个条状性金属按扣（按扣颜色：古银色）
12，Front yoke with twin needle stitching
前拼腰双针缝合。
13，Box stitch detail at chest pocket
胸（部的口）袋盒形封合针线详情。
14，2x front chest pockets with twin needle stitching,
2x bartacks at pocket opening
& 1x branded metal snap
(**not to be quilted**)
(snap col - antique silver）
两个前胸袋用双针缝合，
袋口两个打枣点和一个条形金属按扣。
(**不要缝合**)
(按扣颜色：古银色)
15，Button stand to have footstithing with 6x branded metal snaps
(snap col - antique silver)
钮子/钮门搭位有脚针线针，并带有6个条形金属按扣 （按扣颜色：古银色）
16，2x front side entry pockets with twin needle stitching,
2x bartacks at pocket opening
& 1x branded metal snap
两个前插入式口袋 双针缝合，
袋口有2个打枣点和1个条形金属按扣。
17，Topstitch detail at hem
边缝明线详情说明。
18，PU collar with footstitching
PU （见前面解释PU）领口脚线针缝合。
19，Drop shoulder with edgestitching to be flannel
间边线的肩下垂用发兰绒料。
20，Back yoke with twin needle stitching
后过肩双针缝合。
21，Inner body lining to be yarn dye flannel
内衫身里应该用色织法兰绒布。
22，Body & sleeves to be padded & quilted
上衣的主要部分(领、袖除外）和袖口应该装上填料并缝合。
23，Laid on PU strip with edgestitching at sleeve
袖口处的间边线应装置聚氨酯布条。
【精心人工翻译，确保正确无误。】
【译者：科技英语强人团：宋ocean 】
Overbust(上图顶点):34
最大的破产(apex):35½”
在破产:29¼”
腰:28日”
上臀围4:34½”
低臀8”:38½”
23¾大腿1”:“
躯干:62”
望采纳
- Reduce the hood as indicated by the pins we have placed on it;缩短帽子大小，按照我们别针位置的指示。
- Reduce sleeve lenght up to 68 cm 袖长缩短至68厘米
- Increase + 2cm the height of the jacket (therefore the jacket will become +2cm longer);夹克衫衣长增加2厘米（所以夹克会比原来长2厘米）
- Move up the lower pockets by 2 cm from the bottom edge (so they should finish where the needle is placed on the proto);底部下边的口袋向上移2厘米（所以他们应该在照片上针的位置处为止）
- Please double the shell fabric inside the 2 pockets placed on the upper part;请将上方的两个口袋，口袋里用面布缝在里布上。
- Add central stitching between the edge and the zipper on the 2 lateral pockets (see where the needle is placed)-两边侧袋拉链边缝中车上针线迹（看针指示的地方）
- The labels should be attached following the way we have placed them on the proto 衣标应该车在我们样衣指示的位置
- Please apply Doyle jacquard personalised tape (as indicated inside the prototype) in order to cover the stitching between shell fabric and jersey from side to side, making sure not to sew it centrally for 6 cm to be used as inner hook (see proto) 请加上提花织带（样衣内的指示）为了盖掉面布和泽西布缝合的针迹，请注意不要从中间车缝，留六厘米作为衣领内畔。
相关视频
