瑞星提示Trojan.PSW.XYOnline.jm但杀不掉啊怎么办
作者&投稿：阙菲 （联系方式在网页底部的电邮联系）
瑞星杀不掉！Trojan.PSW.Win32.XYOnline.abe~
这种病毒怎么清除? 特洛伊木马（Trojan horse）
完整的木马程序一般由两个部份组成：一个是服务器程序，一个是控制器程序。“中了木马”就是指安装了木马的服务器程序，若你的电脑被安装了服务器程序，则拥有控制器程序的人就可以通过网络控制你的电脑、为所欲为，这时你电脑上的各种文件、程序，以及在你电脑上使用的帐号、密码就无安全可言了。
木马程序不能算是一种病毒，但越来越多的新版的杀毒软件，已开始可以查杀一些木马了，所以也有不少人称木马程序为黑客病毒。
特洛伊木马是如何启动的
1. 在Win.ini中启动
在Win.ini的[windows]字段中有启动命令"load＝"和"run＝"，在一般情况下 "＝"后面是空白的，如果有后跟程序，比方说是这个样子：
run=c:\windows\file.exe
load=c:\windows\file.exe
要小心了，这个file.exe很可能是木马哦。
2.在System.ini中启动
System.ini位于Windows的安装目录下，其[boot]字段的shell=Explorer.exe是木马喜欢的隐藏加载之所，木马通常的做法是将该何变为这样:shell=Explorer.exefile.exe。注意这里的file.exe就是木马服务端程序!
另外，在System.中的[386Enh]字段，要注意检查在此段内的"driver＝路径\程序名"这里也有可能被木马所利用。再有，在System.ini中的[mic]、[drivers]、[drivers32]这3个字段，这些段也是起到加载驱动程序的作用，但也是增添木马程序的好场所，现在你该知道也要注意这里喽。
3.利用注册表加载运行
如下所示注册表位置都是木马喜好的藏身加载之所，赶快检查一下，有什么程序在其下。
4.在Autoexec.bat和Config.sys中加载运行
请大家注意，在C盘根目录下的这两个文件也可以启动木马。但这种加载方式一般都需要控制端用户与服务端建立连接后，将己添加木马启动命令的同名文件上传到服务端覆盖这两个文件才行，而且采用这种方式不是很隐蔽。容易被发现，所以在Autoexec.bat和Confings中加载木马程序的并不多见，但也不能因此而掉以轻心。
5.在Winstart.bat中启动
Winstart.bat是一个特殊性丝毫不亚于Autoexec.bat的批处理文件，也是一个能自动被Windows加载运行的文件。它多数情况下为应用程序及Windows自动生成，在执行了Windows自动生成，在执行了Win.com并加截了多数驱动程序之后
开始执行 (这一点可通过启动时按F8键再选择逐步跟踪启动过程的启动方式可得知)。由于Autoexec.bat的功能可以由Witart.bat代替完成，因此木马完全可以像在Autoexec.bat中那样被加载运行，危险由此而来。
6.启动组
木马们如果隐藏在启动组虽然不是十分隐蔽，但这里的确是自动加载运行的好场所，因此还是有木马喜欢在这里驻留的。启动组对应的文件夹为C:\Windows\start menu\programs\startup,在注册表中的位置:HKEY_CURRENT_USER\Software\Microsoft\windows\CurrentVersion\Explorer\shell
Folders Startup="c:\windows\start menu\programs\startup"。要注意经常检查启动组哦!
7.*.INI
即应用程序的启动配置文件，控制端利用这些文件能启动程序的特点，将制作好的带有木马启动命令的同名文件上传到服务端覆盖这同名文件，这样就可以达到启动木马的目的了。只启动一次的方式:在winint.ini.中(用于安装较多)。
8.修改文件关联
修改文件关联是木马们常用手段 (主要是国产木马，老外的木马大都没有这个功能)，比方说正常情况下TXT文件的打开方式为Notepad.EXE文件，但一旦中了文件关联木马，则txt文件打开方式就会被修改为用木马程序打开，如著名的国产木马冰河就是这样干的. "冰河"就是通过修改HKEY_CLASSES_ROOT\txtfile\whell\open\command下的键值，将“C:\WINDOWS\NOTEPAD.EXE本应用Notepad打开，如著名的国产HKEY一CLASSES一ROOT\txt闹e\shell\open\commandT的键值，将 "C:\WINDOWS\NOTEPAD.EXE%l"改为 "C:\WINDOWS\SYSTEM\SYSEXPLR.EXE%l"，这样，一旦你双击一个TXT文件，原本应用Notepad打开该文件，现在却变成启动木马程序了，好狠毒哦!请大家注意，不仅仅是TXT文件，其他诸如HTM、EXE、ZIP.COM等都是木马的目标，要小心搂。
对付这类木马，只能经常检查HKEY_C\shell\open\command主键，查看其键值是否正常。
9.捆绑文件
实现这种触发条件首先要控制端和服务端已通过木马建立连接，然后控制端用户用工具软件将木马文件和某一应用程序捆绑在一起，然后上传到服务端覆盖源文件，这样即使木马被删除了，只要运行捆绑了木马的应用程序，木马义会安装上去。绑定到某一应用程序中，如绑定到系统文件，那么每一次Windows启动均会启动木马。
10.反弹端口型木马的主动连接方式
反弹端口型木马我们已经在前面说过了，由于它与一般的木马相反，其服务端 (被控制端)主动与客户端 (控制端)建立连接，并且监听端口一般开在80，所以如果没有合适的工具、丰富的经验真的很难防范。这类木马的典型代表就是网络神偷"。由于这类木马仍然要在注册表中建立键值注册表的变化就不难查到它们。同时，最新的天网防火墙(如我们在第三点中所讲的那样)，因此只要留意也可在网络神偷服务端进行主动连接时发现它。
WORM_NUGACHE.G(威金)和TROJ_CLAGGE.B 特洛伊木马（Trojan horse）
的解决方案:
WORM_NUGACHE.G(威金)
病毒码发布日期: Dec 8, 2006
解决方案:
Note: To fully remove all associated malware, perform the clean solution for TROJ_DLOADER.IBZ.
Terminating the Malware Program
This procedure terminates the running malware process.
Open Windows Task Manager.
• On Windows 98 and ME, press
CTRL+ALT+DELETE
• On Windows NT, 2000, XP, and Server 2003, press
CTRL+SHIFT+ESC, then click the Processes tab.
In the list of running programs*, locate the process:
MSTC.EXE
Select the malware process, then press either the End Task or the End Process button, depending on the version of Windows on your computer.
To check if the malware process has been terminated, close Task Manager, and then open it again.
Close Task Manager.
*NOTE: On computers running Windows 98 and ME, Windows Task Manager may not show certain processes. You can use a third party process viewer such as Process Explorer to terminate the malware process.
On computers running all Windows platforms, if the process you are looking for is not in the list displayed by Task Manager or Process Explorer, continue with the next solution procedure, noting additional instructions. If the malware process is in the list displayed by either Task Manager or Process Explorer, but you are unable to terminate it, restart your computer in safe mode.
Editing the Registry
This malware modifies the computer's registry. Users affected by this malware may need to modify or delete specific registry keys or entries. For detailed information regarding registry editing, please refer to the following articles from Microsoft:
HOW TO: Backup, Edit, and Restore the Registry in Windows 95, Windows 98, and Windows ME
HOW TO: Backup, Edit, and Restore the Registry in Windows NT 4.0
HOW TO: Backup, Edit, and Restore the Registry in Windows 2000
HOW TO: Back Up, Edit, and Restore the Registry in Windows XP and Server 2003
Removing Autostart Entries from the Registry
Removing autostart entries from the registry prevents the malware from executing at startup.
If the registry entry below is not found, the malware may not have executed as of detection. If so, proceed to the succeeding solution set.
Open Registry Editor. Click Start>Run, type REGEDIT, then press Enter.
In the left panel, double-click the following:
HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>
Windows>CurrentVersion>Run
In the right panel, locate and delete the entry:
Microsoft Domain Controller = "%System%\mstc.exe"
(Note: %System% is the Windows system folder, which is usually C:\Windows\System on Windows 98 and ME, C:\WINNT\System32 on Windows NT and 2000, and C:\Windows\System32 on Windows XP and Server 2003.)
Removing Added Key from the Registry
Still in Registry Editor, in the left panel, double-click the following:
HKEY_LOCAL_MACHINE>SOFTWARE
In the left panel, locate and delete the following key:
GNU
Close Registry Editor.
Important Windows ME/XP Cleaning Instructions
Users running Windows ME and XP must disable System Restore to allow full scanning of infected computers.
Users running other Windows versions can proceed with the succeeding solution set(s).
Running Trend Micro Antivirus
If you are currently running in safe mode, please restart your computer normally before performing the following solution.
Scan your computer with Trend Micro antivirus and delete files detected as WORM_NUGACHE.G. To do this, Trend Micro customers must download the latest virus pattern file and scan their computer. Other Internet users can use HouseCall, the Trend Micro online virus scanner.
Applying Patch
This malware exploits known vulnerability in Windows. Download and install the fix patch supplied by Microsoft. Refrain from using this product until the appropriate patch has been installed. Trend Micro advises users to download critical patches upon release by vendors.
TROJ_CLAGGE.B 特洛伊木马（Trojan horse）
病毒码发布日期: Sep 18, 2006
解决方案:
Identifying the Malware Program
To remove this malware, first identify the malware program.
Scan your computer with your Trend Micro antivirus product.
NOTE the path and file name of all files detected as TROJ_CLAGGE.B.
Trend Micro customers need to download the latest virus pattern file before scanning their computer. Other users can use Housecall, the Trend Micro online virus scanner.
Editing the Registry
This malware modifies the computer's registry. Users affected by this malware may need to modify or delete specific registry keys or entries. For detailed information regarding registry editing, please refer to the following articles from Microsoft:
HOW TO: Backup, Edit, and Restore the Registry in Windows 95, Windows 98, and Windows ME
HOW TO: Backup, Edit, and Restore the Registry in Windows NT 4.0
HOW TO: Backup, Edit, and Restore the Registry in Windows 2000
HOW TO: Back Up, Edit, and Restore the Registry in Windows XP and Server 2003
Removing Malware Entry from the Registry
Open Registry Editor. Click Start>Run, type REGEDIT, then press Enter.
In the left panel, double-click the following:
HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>
SharedAccess>Parameters>FiREWaLLpolicy>StAnDaRDPrOFiLe>
AUtHorizedapplications>List
In the right panel, locate and delete the entry:
{Malware path and file name} ="{Malware path and file name}:*:ENABLED:0"
Close Registry Editor.
Important Windows ME/XP Cleaning Instructions
Users running Windows ME and XP must disable System Restore to allow full scanning of infected computers.
Users running other Windows versions can proceed with the succeeding solution set(s).
Running Trend Micro Antivirus
If you are currently running in safe mode, please restart your computer normally before performing the following solution.
Scan your computer with Trend Micro antivirus and delete files detected as TROJ_CLAGGE.B and TROJ_KEYLOG.CO. To do this, Trend Micro customers must download the latest virus pattern file and scan their computer. Other Internet users can use HouseCall, the Trend Micro online virus scanner
把瑞星卸了，装卡巴杀毒
在安全模式下杀就行了。改成直接删除病毒
相关视频
好朋友Trojan.PSW.Win32.XYOnline.abe应当是个盗号木马，个人建议你用360系统急救箱（它不用安装，解压后就可使用）在带网络安全模式下查杀试试，它是强力查杀木马病毒的系统救援工具，对各类流行的顽固木马查杀效果极佳，如犇牛、机器狗、灰鸽子、扫荡波、磁碟机等。它够强力清除木马和可疑程序，并修复被感染的系统文件，抑制木马再生，是电脑需要急救时最好的帮手。 这样处理应当可以清理干净，希望能帮到你。
如果你是用的瑞星,建议你这样子做:
1.下载"橙色八月"专杀工具,在瑞星网站上有下的,文件不大,很快就下载好.(本机不能下载,可在能上网的机子上下载,COPY过来)
2.重启动,按F8,进入安全模式,用刚才的"橙色八月"专杀工具杀毒,过程有点长,慢慢等(估计一个小时)
3.还是在这个模式下,用你机子上的杀毒软件(如瑞星)杀毒,这个过程一样的慢;
4.杀毒完成后,重新启动,一切OK
用超级兔子很容易就解决了呀！
1.先用兔子里的木马查杀工具扫描一遍，如果能检查的出就清除。
2.在专业清除项目里看看你是中了哪些恶意程序，卸载后重启。有些需要在安全模式下卸载。
3.把老跳出来的网址复制一下,添加到超级兔子上网精灵里面的禁止浏览指定网址里面确定后看，这些个网站就不会再跳出来了！
我也中过恶意网站，就是这样清除掉的！
这种病毒怎么清除? 特洛伊木马（Trojan horse）
完整的木马程序一般由两个部份组成：一个是服务器程序，一个是控制器程序。“中了木马”就是指安装了木马的服务器程序，若你的电脑被安装了服务器程序，则拥有控制器程序的人就可以通过网络控制你的电脑、为所欲为，这时你电脑上的各种文件、程序，以及在你电脑上使用的帐号、密码就无安全可言了。
木马程序不能算是一种病毒，但越来越多的新版的杀毒软件，已开始可以查杀一些木马了，所以也有不少人称木马程序为黑客病毒。
特洛伊木马是如何启动的
1. 在Win.ini中启动
在Win.ini的[windows]字段中有启动命令"load＝"和"run＝"，在一般情况下 "＝"后面是空白的，如果有后跟程序，比方说是这个样子：
run=c:\windows\file.exe
load=c:\windows\file.exe
要小心了，这个file.exe很可能是木马哦。
2.在System.ini中启动
System.ini位于Windows的安装目录下，其[boot]字段的shell=Explorer.exe是木马喜欢的隐藏加载之所，木马通常的做法是将该何变为这样:shell=Explorer.exefile.exe。注意这里的file.exe就是木马服务端程序!
另外，在System.中的[386Enh]字段，要注意检查在此段内的"driver＝路径\程序名"这里也有可能被木马所利用。再有，在System.ini中的[mic]、[drivers]、[drivers32]这3个字段，这些段也是起到加载驱动程序的作用，但也是增添木马程序的好场所，现在你该知道也要注意这里喽。
3.利用注册表加载运行
如下所示注册表位置都是木马喜好的藏身加载之所，赶快检查一下，有什么程序在其下。
4.在Autoexec.bat和Config.sys中加载运行
请大家注意，在C盘根目录下的这两个文件也可以启动木马。但这种加载方式一般都需要控制端用户与服务端建立连接后，将己添加木马启动命令的同名文件上传到服务端覆盖这两个文件才行，而且采用这种方式不是很隐蔽。容易被发现，所以在Autoexec.bat和Confings中加载木马程序的并不多见，但也不能因此而掉以轻心。
5.在Winstart.bat中启动
Winstart.bat是一个特殊性丝毫不亚于Autoexec.bat的批处理文件，也是一个能自动被Windows加载运行的文件。它多数情况下为应用程序及Windows自动生成，在执行了Windows自动生成，在执行了Win.com并加截了多数驱动程序之后
开始执行 (这一点可通过启动时按F8键再选择逐步跟踪启动过程的启动方式可得知)。由于Autoexec.bat的功能可以由Witart.bat代替完成，因此木马完全可以像在Autoexec.bat中那样被加载运行，危险由此而来。
6.启动组
木马们如果隐藏在启动组虽然不是十分隐蔽，但这里的确是自动加载运行的好场所，因此还是有木马喜欢在这里驻留的。启动组对应的文件夹为C:\Windows\start menu\programs\startup,在注册表中的位置:HKEY_CURRENT_USER\Software\Microsoft\windows\CurrentVersion\Explorer\shell
Folders Startup="c:\windows\start menu\programs\startup"。要注意经常检查启动组哦!
7.*.INI
即应用程序的启动配置文件，控制端利用这些文件能启动程序的特点，将制作好的带有木马启动命令的同名文件上传到服务端覆盖这同名文件，这样就可以达到启动木马的目的了。只启动一次的方式:在winint.ini.中(用于安装较多)。
8.修改文件关联
修改文件关联是木马们常用手段 (主要是国产木马，老外的木马大都没有这个功能)，比方说正常情况下TXT文件的打开方式为Notepad.EXE文件，但一旦中了文件关联木马，则txt文件打开方式就会被修改为用木马程序打开，如著名的国产木马冰河就是这样干的. "冰河"就是通过修改HKEY_CLASSES_ROOT\txtfile\whell\open\command下的键值，将“C:\WINDOWS\NOTEPAD.EXE本应用Notepad打开，如著名的国产HKEY一CLASSES一ROOT\txt闹e\shell\open\commandT的键值，将 "C:\WINDOWS\NOTEPAD.EXE%l"改为 "C:\WINDOWS\SYSTEM\SYSEXPLR.EXE%l"，这样，一旦你双击一个TXT文件，原本应用Notepad打开该文件，现在却变成启动木马程序了，好狠毒哦!请大家注意，不仅仅是TXT文件，其他诸如HTM、EXE、ZIP.COM等都是木马的目标，要小心搂。
对付这类木马，只能经常检查HKEY_C\shell\open\command主键，查看其键值是否正常。
9.捆绑文件
实现这种触发条件首先要控制端和服务端已通过木马建立连接，然后控制端用户用工具软件将木马文件和某一应用程序捆绑在一起，然后上传到服务端覆盖源文件，这样即使木马被删除了，只要运行捆绑了木马的应用程序，木马义会安装上去。绑定到某一应用程序中，如绑定到系统文件，那么每一次Windows启动均会启动木马。
10.反弹端口型木马的主动连接方式
反弹端口型木马我们已经在前面说过了，由于它与一般的木马相反，其服务端 (被控制端)主动与客户端 (控制端)建立连接，并且监听端口一般开在80，所以如果没有合适的工具、丰富的经验真的很难防范。这类木马的典型代表就是网络神偷"。由于这类木马仍然要在注册表中建立键值注册表的变化就不难查到它们。同时，最新的天网防火墙(如我们在第三点中所讲的那样)，因此只要留意也可在网络神偷服务端进行主动连接时发现它。
WORM_NUGACHE.G(威金)和TROJ_CLAGGE.B 特洛伊木马（Trojan horse）
的解决方案:
WORM_NUGACHE.G(威金)
病毒码发布日期: Dec 8, 2006
解决方案:
Note: To fully remove all associated malware, perform the clean solution for TROJ_DLOADER.IBZ.
Terminating the Malware Program
This procedure terminates the running malware process.
Open Windows Task Manager.
• On Windows 98 and ME, press
CTRL+ALT+DELETE
• On Windows NT, 2000, XP, and Server 2003, press
CTRL+SHIFT+ESC, then click the Processes tab.
In the list of running programs*, locate the process:
MSTC.EXE
Select the malware process, then press either the End Task or the End Process button, depending on the version of Windows on your computer.
To check if the malware process has been terminated, close Task Manager, and then open it again.
Close Task Manager.
*NOTE: On computers running Windows 98 and ME, Windows Task Manager may not show certain processes. You can use a third party process viewer such as Process Explorer to terminate the malware process.
On computers running all Windows platforms, if the process you are looking for is not in the list displayed by Task Manager or Process Explorer, continue with the next solution procedure, noting additional instructions. If the malware process is in the list displayed by either Task Manager or Process Explorer, but you are unable to terminate it, restart your computer in safe mode.
Editing the Registry
This malware modifies the computer's registry. Users affected by this malware may need to modify or delete specific registry keys or entries. For detailed information regarding registry editing, please refer to the following articles from Microsoft:
HOW TO: Backup, Edit, and Restore the Registry in Windows 95, Windows 98, and Windows ME
HOW TO: Backup, Edit, and Restore the Registry in Windows NT 4.0
HOW TO: Backup, Edit, and Restore the Registry in Windows 2000
HOW TO: Back Up, Edit, and Restore the Registry in Windows XP and Server 2003
Removing Autostart Entries from the Registry
Removing autostart entries from the registry prevents the malware from executing at startup.
If the registry entry below is not found, the malware may not have executed as of detection. If so, proceed to the succeeding solution set.
Open Registry Editor. Click Start>Run, type REGEDIT, then press Enter.
In the left panel, double-click the following:
HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>
Windows>CurrentVersion>Run
In the right panel, locate and delete the entry:
Microsoft Domain Controller = "%System%\mstc.exe"
(Note: %System% is the Windows system folder, which is usually C:\Windows\System on Windows 98 and ME, C:\WINNT\System32 on Windows NT and 2000, and C:\Windows\System32 on Windows XP and Server 2003.)
Removing Added Key from the Registry
Still in Registry Editor, in the left panel, double-click the following:
HKEY_LOCAL_MACHINE>SOFTWARE
In the left panel, locate and delete the following key:
GNU
Close Registry Editor.
Important Windows ME/XP Cleaning Instructions
Users running Windows ME and XP must disable System Restore to allow full scanning of infected computers.
Users running other Windows versions can proceed with the succeeding solution set(s).
Running Trend Micro Antivirus
If you are currently running in safe mode, please restart your computer normally before performing the following solution.
Scan your computer with Trend Micro antivirus and delete files detected as WORM_NUGACHE.G. To do this, Trend Micro customers must download the latest virus pattern file and scan their computer. Other Internet users can use HouseCall, the Trend Micro online virus scanner.
Applying Patch
This malware exploits known vulnerability in Windows. Download and install the fix patch supplied by Microsoft. Refrain from using this product until the appropriate patch has been installed. Trend Micro advises users to download critical patches upon release by vendors.
TROJ_CLAGGE.B 特洛伊木马（Trojan horse）
病毒码发布日期: Sep 18, 2006
解决方案:
Identifying the Malware Program
To remove this malware, first identify the malware program.
Scan your computer with your Trend Micro antivirus product.
NOTE the path and file name of all files detected as TROJ_CLAGGE.B.
Trend Micro customers need to download the latest virus pattern file before scanning their computer. Other users can use Housecall, the Trend Micro online virus scanner.
Editing the Registry
This malware modifies the computer's registry. Users affected by this malware may need to modify or delete specific registry keys or entries. For detailed information regarding registry editing, please refer to the following articles from Microsoft:
HOW TO: Backup, Edit, and Restore the Registry in Windows 95, Windows 98, and Windows ME
HOW TO: Backup, Edit, and Restore the Registry in Windows NT 4.0
HOW TO: Backup, Edit, and Restore the Registry in Windows 2000
HOW TO: Back Up, Edit, and Restore the Registry in Windows XP and Server 2003
Removing Malware Entry from the Registry
Open Registry Editor. Click Start>Run, type REGEDIT, then press Enter.
In the left panel, double-click the following:
HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>
SharedAccess>Parameters>FiREWaLLpolicy>StAnDaRDPrOFiLe>
AUtHorizedapplications>List
In the right panel, locate and delete the entry:
{Malware path and file name} ="{Malware path and file name}:*:ENABLED:0"
Close Registry Editor.
Important Windows ME/XP Cleaning Instructions
Users running Windows ME and XP must disable System Restore to allow full scanning of infected computers.
Users running other Windows versions can proceed with the succeeding solution set(s).
Running Trend Micro Antivirus
If you are currently running in safe mode, please restart your computer normally before performing the following solution.
Scan your computer with Trend Micro antivirus and delete files detected as TROJ_CLAGGE.B and TROJ_KEYLOG.CO. To do this, Trend Micro customers must download the latest virus pattern file and scan their computer. Other Internet users can use HouseCall, the Trend Micro online virus scanner
把瑞星卸了，装卡巴杀毒
在安全模式下杀就行了。改成直接删除病毒
相关视频
急,杀毒问题!!!用瑞星杀,出现一批Trojan开头的东西,杀完
如果瑞星杀毒软件检测到以"Trojan"开头的病毒并已经杀除，那么你的系统现在应该已经清除了这些恶意程序。但为了确保系统安全，建议你采取以下措施：1. 更新你的杀毒软件和操作系统，确保拥有最新的安全补丁和病毒库，从而提高防护能力。2. 进行一次全盘扫描，检查是否还有残留的病毒或恶意软件。有时候，病毒会...
